top of page
KS-270C Pitch Servo P/N: 065-00178-0100
KS-270C Pitch Servo P/N:065-00178-0100
**PLEASE NOTE UNIT IN PHOTO IS NOT STOCK UNIT** 
 
  • Trim Servo used to provide AFCS control of the elevators
  • Contains a servo motor with amplifier and an engage clutch, as well as a torque sensor for trim command generation
  • Outputs a dual-channel trim sense signal with a scale factor of 100mV/in-lb, with a positive differential voltage representing CW torque 
  • Maximum sensed torque is at least 20 in-lb in each direction
  • Also contains a tach feedback signal to provide servo motion sensing
  • Outputs a differential signal with a scale factor of approximately 5.3V for full servo speed
  • Is installed with a KM 275 servo mount, which contains a slip clutch for pilot override
  • The servo receives a differential command input and drives the servo motor with a speed proportional to the magnitued of the command
  • The command polarity will determine direction of the servo rotation
  • The command inputs have an impedance of at least 15K ohms
  • The interface is designed such that an open command signal will not cause a servo drive of more than 25% of full-scale speed
  • Contains a validity circuit which compares the motor voltage against the servo command
  • The actuator outputs a open/ground discrete signal, where ground represents a valid servo
  • If the comparison fails, the servo outputs an invalid signal to the FCC

KS-270C Pitch Servo P/N: 065-00178-0100

AU$3,437.50Price
Sales Tax Included

    As Removed / Removed Serviceable  - All units that are marked AR or Removed Serviceable are units that have been removed in Serviceable working condition from aircraft, these units will not come with a release certificate  but will come with CASA aircraft tag trace 

    ​

    Repaired / Serviceable - All units tagged Repaired or Serviceable will come with either a CASA form 1 Release or FAA 8130-3.

    ​

    Overhauled - All units tagged Overhauled will come with either a CASA form 1 Release or FAA 8130-3.

    ​

    New - All units tagged New will come with Factory Release documentation. 

    ​

    ​

    bottom of page